Alarm Troubleshooting |
 
1313 Plus Advanced 12V Spike Suppressor
£16.29 The ACT-1313-PLUS not only eliminates false alarms caused by induced AC and RFI interference but a bi-coloured LED will also indicate any potential DC power overload or low resistance fault on any cable connected.
|
230MSF 230V Mains Filter
£23.85 Prevents false alarms and system malfunctions caused by EMI/RFI signals and nearby lightning via the 230VAC mains supply. Made in UK.
|
2323 230V Mainspike Suppressor
£16.65 With up to 4,500 Amp spike suppression, the ACT 2323 protects all security and fire alarm panels, CCTV cameras and access control equipment against nearby lightning causing false alarms and system malfunctions. Made in UK
|
1166 Earth Line Choke
£10.80 Prevents electrical RFI from affecting the 12VDC supply on metal control panels.
|
1313 12V Spike Suppressor
£9.77 Protects 12VDC alarm control equipment and detectors from induced AC and nearby lightning - fit as standard for essential false alarm protection. Made in UK.
|
1414 24V Spike Suppressor
£10.21 For fire alarm systems, this 24V spike suppressor will prevent false alarms and system malfunctions by decoupling AC from cables and clamp the supply against spikes.
|
CPS3 Intruder Control Panel Kit
£42.84 Protects metal intruder control panels from EMI, RFI and nearby lightning via the AC, DC supply and Earth.
|
CPS3 Fire Control Panel Kit
£44.19 Protects metal fire alarm control panels from EMI, RFI and nearby lightning via the AC, DC supply and Earth.
|
211 Intruder Mainspike Kit
£37.80 Protects metal intruder control panels from EMI, RFI and nearby lightning via the AC, DC supply and Earth.
|
211 Fire Mainspike Kit
£37.80 Protects metal fire control panels from EMI, RFI and nearby lightning via the AC, DC supply and Earth.
|
2468 RFI Filter
£27.00 A powerful 1Amp rated RFI filter used to reduce RFI from affecting alarm detectors, sounders and DC access control circuits.
|
4425 iD Line RFI Filter
£11.70 Prevents RFI signals from affecting the ID alarm system. This filter will allow data to pass through as normal but will stop RFI signals from entering the control panel.
|
3010 12V Data Ferrite Tubes
£14.40 Stops RFI signals from affecting alarm circuit wiring. Slides over DC, data and contact wires. Fit as standard to both ends of alarm cabling.
|
431 ADSL Filter with Lightning Suppression
£20.25 ACT/431 DSL Alarm Filter is designed to meet BS EN 50131 requirements with protection from lightning surges and power crosses.
|
|
|
Certificate No: 272
ISO 9001